Skip to Navigation | Skip to Content

Omnitrader by Nirvana Systems

OmniTrader 2007 Support

07/30/08 - Release 4

The following issues have been addressed in Release 4:

Note:

  • Pre-Release 4V promoted to Release 4.

Bug Fixes:

  • Corrected an issue with MBT where new accounts would receive a message about insufficient equity/buying power when placing new trades.

07/14/08 - Pre-Release 4V

The following issues have been addressed in Pre-Release 4V:

Bug Fixes:

  • Fixed voteline disappearring issue related to Chart Pattern Systems.
  • Fixed manually drawn Trendlines displaying as Full Lines.

Enhancements:

  • Added support for the latest MB Trading Navigator version 11.1.0.2.

05/07/08 - Pre-Release 4U

The following issues have been addressed in Pre-Release 4U:

Bug Fixes:

  • Corrected OT lockup when using Daily Floor Pivot indicator in OmniScan
  • Corrected regional setting errors when using the Exchange Editor
  • Corrected errors when adding columns to the focus list in Real Time profiles
  • Ability to roll OT back to a specific historical date from the To Do List now functions properly
  • When IB disconnects the broker drop down will turn red to alert you of disconnect as intended
  • Corrected focus list sorting issue when sorting on Industry Group columns
  • Reload Data will again  work correctly with Quote.com
  • Fixed Error 5 when trying to add color chart
  • The Fixed Test Period will now use the correct date ranges
  • Resolved voting issue that was throwing 'Error -2147220991: Automation error'
  • Parameters set for VBA stops in strategies will now retain their values on subsequent compiles. They will only reset if you change the number of parameters defined
  • Metastock users without OmniData can now create custom groups with the GroupTrader plug-in.
  • Corrected Error 5 when attempting to train a NN Score block training on Shorts Only.
  • Analyzing individual NN Score block inputs with Input Sensitivity selected will no longer throw Arithmetic overflow errors.
  • Syncing 4 charts will no longer throw automation errors
  • FTProf% is now works correctly within OmniPilot.

^ Back to top

03/21/08 - Pre-Release 4T

The following issues have been addressed in Pre-Release 4T:

Updates:

  • Updated U.S. holidays and Exchange times.

^ Back to top

03/19/08 - Pre-Release 4S

The following issues have been addressed in Pre-Release 4S:

Fixes:

  • Updated Holiday information for Good Friday

^ Back to top

3/12/08 - Pre-Release 4R

The following issues have been addressed in Pre-Release 4R:

Bug Fixes:

  • Fixed an issue related to website change at Foliofn.
  • Fixed an issue that resulted in the historical Forex data changing when reloading large amounts of data.
  • Cleaned up and Improved IQFeed connection issues. This update will require a reinstall of the IQFeed API which will be handled by OmniTrader.

^ Back to top

1/15/08 - Pre-Release 4Q

The following issues have been addressed in Pre-Release 4Q:

Bug Fixes:

  • Updated the Holiday information to remove an erroneous holiday of 1/15/2008, this would cause no data to be seen for US markets.

^ Back to top

12/06/07 - Pre-Release 4P

The following issues have been addressed in Pre-Release 4p:

Bug Fixes:

  • Data collection with IQfeed has been corrected
  • Interactive Brokers - TWS disconnects are handled better
  • Corrected login issue when FolioFN does not provide price for holdings

^ Back to top

11/20/07 - Pre-Release 4O

The following issues have been addressed in Pre-Release 40:

Brokerage Specific Fix:

PreRelease 4O has important changes to Integrated Brokerage for MB Trading customers.. These changes add additional synchronization and security to trading using Nirvana’s Integrated Brokerage module. OmniTrader 2007 customers trading with MB Trading are strongly encouraged to update to PreRelease 4O at their earliest convenience.

Foliofn Specific Fix:

Due to a Foliofn website change holdings information was not received correctly.

^ Back to top

10/15/07 - Pre-Release 4N

The following issues have been addressed in Pre-Release 4N:

ISSUE

DESCRIPTION

Bug Fix:

Fixed error the resulted when shutting down OT while RT was running.

Bug Fix:

Fixed error 9 when using Market Range and Limit Range

^ Back to top

10/08/07 - Pre-Release 4M

The following issues have been addressed in Pre-Release 4M:

General Bug Fixes:

  1. Fixed an issue with 2 or more indicators on the price chart or other panes.  In certain cases the drawing tools were not available in the template.
  2. Fixed an Error 9 subscript error generated when entries were not set to execute immediately.
  3. Corrected a Signal annotation clipping problem.  Annotation of signals should now clip properly when at the edges off the chart
  4. Fixed a problem with eSignal data feed for Arizona time zone.  Data now starts feeding at the market open.
  5. Corrected an eSignal data feed Version 10 compatibility issues.  Version 10 of eSignal is now fully supported.
  6. Corrected an OmniScan issue with changing profiles and using the Focus List drop-down.  Lists are now available in the drop-down.
  7. Fixed a problem with the count number for the My Symbols list. 
  8. Corrected a display problem when using an n-bar exit.  In-trade line is now showing correctly in the vote line area.
  9. The Volume, Open, High, Low, & Close columns in the Focus List can now be sorted correctly
  10. Can now draw annotations in the indicator and system panes.

Integrated Broker Specific Fixes:

  1. Fixed an issue when using IQ feed.  Some futures symbols were not  able to be traded through the Integrated Brokerage using Interactive Brokers (ES, NQ, YM)

Integrated Broker Specific Enhancements:

  1. MB Trading - Added additional Columns which can be added to the Positions Tab:
    1. PnL/per (Open) - Profit or Loss per trade of Open Positions
    2. %Change - Percent Change from Previous Day’s Close
    3. PnL%(Open) - Profit or Loss per trade in Percent of Open Positions

^ Back to top

10/01/07 - Pre-Release 4L

The following issues have been addressed in Pre-Release 4L:

ISSUE

DESCRIPTION

Bug Fix:

Fixed Error related to having "Best Signal According to Advisor Rating" enabled.

Bug Fix:

Fixed issue when entering Portfolio Simulator.

^ Back to top

9/28/07 - Pre-Release 4K

The following issues have been addressed in Pre-Release 4K:

Note: Updated OmniPilot Scripts for Pre Release 4k

OmniPilot Specific Fixes:

There have been a number of changes made to the standard OmniPilot scripts.  Many of these changes are related to allocation calculations.  The changes impact RT_Trader, EOD_Trader, WF_Trader and Demo.  Users that base their own scripts on Common.txt and UserInterface.txt will be affected by these changes as well. All the described changes are for the “Manual Allocation” method specified under the Account Tab.

^ Back to top

9/27/07 - Pre-Release 4J

The following issues have been addressed in Pre-Release 4J:

General Bug Fixes:

  1. Date advance now only advances 1 bar not 1 week per click.
  2. .NET errors when running Portfolio Simulator on a specific portfolio.
  3. Fixed tool bar loading issue when OT was minimized on start up.
  4. Updated the London Exchange start time. Changed from 8:30AM to 8:00AM
  5. Support for eSignal 10 is now added.

OmniPilot Specific Fixes:

There have been a number of changes made to the standard OmniPilot scripts.  Many of these changes are related to allocation calculations.  The changes impact RT_Trader, EOD_Trader, WF_Trader and Demo.  Users that base their own scripts on Common.txt and UserInterface.txt will be affected by these changes as well. All the described changes are for the “Manual Allocation” method specified under the Account Tab.

Equities Trading:

  1. Added the ability to specify the Maximum Leverage to use
    For Manual Allocation Method, added a text box to the Account tab to specify the Max Leverage to use in allocation calculations.  Previously the leverage was not specified and the scripts used the value returned from the connection with the broker.  Being able to specify the Maximum Leverage to use gives the user more control to over ride the broker’s maximum leverage. 
  2. Changed calculations for Buying Power For Manual Allocation Method
    Previously, the OmniPilot scripts used the Buying Power returned from the connection with the broker.  This information was not always correct and the user had no control of the amount of leverage to use.  For equities, the scripts now calculate the remaining buying power based on the user specified maximum leverage (see #1) and the value of existing open positions with the broker.

Futures Trading:

  1. Added Table for Futures Margin for Manual Allocation Method
    New allocation calculation method for Futures.  Added a new button under the Accounts Tab to bring up an editable table of commodities and margin prices.  When trading Futures, the scripts will use the default maximum size for trading if possible.  If there is not enough account equity, the scripts will attempt to trade a smaller number of contracts.  The margin per contract field is the amount the user wants to allocate per contract for the commodity.  The user may want to specify a larger value for the allocation as a way to reduce the risk compared to the broker’s minimum margin required value.  There must be an entry in this table for any futures symbol traded in OmniPilot.  FOREX follows the same allocation rules as Equities
  2. Changed calculations for Buying Power for Manual Allocation Method
    The method the scripts use to calculate Buying Power for Futures has also changed.  For Futures, the values specified for margin per contract in the Futures Margin table should incorporate the desired leverage to use.  The scripts will now determine if another position can be taken based on the value of the existing open positions with the broker, the remaining account equity, the specified margin per contract, and the default maximum size. If there is not enough account equity, the scripts will attempt to trade a smaller number of contracts.

General Changes:

  1. Reserve Percent of Equity for Manual Allocation Method
    New functionality under the Account Tab for Manual Allocation.  Added the option to reserve a percentage of the account equity before allocating trades.  This allows the user to allocate trades for less than the total account equity.
  2. EOD_Trader - Removed initial shutdown of OT prior to running the ToDo List
    EOD_Trader no longer shuts down OmniTrader prior to running the ToDo List.  Previously the shutdown was required to prevent synchronization issues that have since been corrected.
  3. Removed Custom Timers for Reconnect
    New timer functions were added to OmniPilot.  Custom timers in the standard scripts are no longer required to handle the Broker disconnect, reconnect actions.

General Enhancements:

  1. Improved Broker connection management if brokerage disconnects or connects with errors. OT will prompt to reconnect.
  2. Updated Crystal Reports version.
  3. Support for IQFeed has been improved to eliminate connection issue.

^ Back to top

8/21/07 - Pre-Release 4I

The following issues have been addressed in Pre-Release 4I:

New Features:

  1. Added Trailing Stop Order type for MBT (Stocks and Futures Only).
  2. Added Break Even and Trailing Profit Virtual Levels for Threshold value.
  3. Added Time Trigger order Option for MBT and IB.

General Bug Fixes:

  1. Error 3050: when running various Real Time Disk Defragmentation tools would cause database lock up issue.
  2. System would lock up when “Buying” Power was exhausted.
  3. The Setting in the Broker settings dialog to “Always convert initial order to Stop Market” was not working.
  4. Collection of Low volume stocks in RT would cause OT to lock up.
  5. Corrected Arizona Time zone data collection issue for EOD and RT
  6. Error 35601 when creating certain new scans in OmniScan.
  7. Base Symbol in an indicator pane is now working.
  8. Adding text to a charted symbol that you have plotted twice would not work.
  9. Reloading of FOREX data would cause the charts to change.
  10. Fixed charting issue when plotting symbols that have a reported value over 100,000 Cents per share.
  11. The Open P/L column under the Open Positions tab does not update in realtime.
  12. Drawing Manual signals on chart no longer cause errors.
  13. In certain cases the vote line does not always display the correct entry point. The new signal remained delayed till the exits became active.
  14. Fixed case where the Trade Calculator was not saving the default amount.
  15. Money Flow Index would not draw lines after being added to both an RT and EOD chart.
  16. Error 3022 when placing trades if system was set to dd/MMM/yyyy format.
  17. Fixed text annotations disappear after switching chart.
  18. Fixed Automatic Trade Plan option in Game Mode.
  19. Fixed issue in the OmniScan's Fundamental Criteria Editor where the Percent/Slider is not saved.
  20. Selecting Edit/'Exchange Information and setting it to a different country database as the default would result in an error: "Country specific database not found!”.
  21. Fixed errors related to using the GT Long Term strategy.
  22. Fixed various alert line issues.
  23. Error 6 in Portfolio Sim when using the NN Trade Size Tab.
  24. The Watch list Eye Icon notification is now displaying in both the focus list and the watchlist.
  25. Fixed issue that resulted in many non-US indexes not updating in realtime charts.
  26. Fixed Error 6: Overflow when using 4 monitors set to 1280 X 1024 resolutions.
  27. Error 3061 when using strategy signal columns.

Integrated Broker Specific Fixes:

  1. When connected to a live broker the trade calculator was adjusting for margin twice.
  2. Fixed Order price changes do not stick after adjustment of chevron.
  3. Fixed issue where all imported trade activity from the broker would result with the Position column showing an arrow for every symbol with a position in the paper broker, not just those with open positions.

OmniPilot Specific Fixes

  1. Unable to trade a 240 minute data period with OmniPilot.
  2. Fixed Chart and OmniPilot Signal Sync issue.

Enhancements:

  1. Data Value window now moves, to improve visibility, when you drag your mouse over it.
  2. Improved Chart behavior when switching data periods or chart books.
  3. Improved Trade Plan Markers so that the specified color chosen is used.
  4. Turned of optimizing of the systems every time a symbol is double-clicked.

^ Back to top

7/16/07 - Pre-Release 4H

The following issues have been addressed in Pre-Release 4H:

Please Read: Important Changes that can impact actual trading in OmniTrader:

  1. When submitting a trade, the default quantity set in the Trade Plan Setup window has been changed to 0 (zero). OmniPilot users may need to reset this default before beginning the next automated trading session.
  2. The allocation calculation in the Trade Calculator is now based on account equity, rather than broker buying power. Your share/contract allocation may need to be adjusted as a result of this change.

Enhancements to the Trade Plan Setup Window (submit):

  1. Changed the default allocation quantity setting in OmniTrader to be zero.
  2. New text area next to the Submit Button that shows: Broker, # of shares or contracts, Long or Short, and Symbol name.
  3. This new text area changes color if there is a connection to a live broker. Green if the trade is a Long, Red if the Trade is a Short. There is no color if the broker is paper.
  4. Moved the trade Initial Quantity value to the right next to the Cancel and Submit buttons.

Modifications to the Trade Calculator:

  1. Added a new area to enter the leverage to use for allocation calculations
  2. The Trade Calculator allocation calculations no longer use broker buying power but now use equity and the user’s preferred leverage value instead.

Modification to the Trade Calculator for Futures and other leveraged commodities (not stocks).

  1. The option to allocate based on % of Buying Power has been disabled.
  2. The option to use the Portfolio Simulator Allocation methods has been disabled.

^ Back to top

7/9/07 - Pre-Release 4G

The following issues have been addressed in Pre-Release 4G:

ISSUE

DESCRIPTION

Bug Fix:

Corrected futures symbol translation for IQFeed. IQfeed with now properly download futures data.

^ Back to top

7/3/07 - Pre-Release 4F

The following issues have been addressed in Pre-Release 4F:

ISSUE

DESCRIPTION

Bug Fix:

Resolved an IB interface issue on Windows Vista.

Bug Fix:

Error 6: Arithmetic operation resulted in an overflow. Occurred in routine - CStopBase .RoundLevel

Bug Fix:

Fixed error generated when using Close Position button when no active position was in effect on the plotted chart.

Bug Fix:

Periodically lower timeframes in a RT profile would stop generating signals.

Bug Fix:

Trade Plan Calculator not updating correctly from the Portfolio Simulator after changing parameters.

Improvement:

Made sections of the Trade Plan Form scrollable to improve visibility when using smaller screen resolutions.

Improvement:

Help Files and user guide updated.

^ Back to top

6/20/07 - Pre-Release 4E

The following issues have been addressed in Pre-Release 4E:

ISSUE

DESCRIPTION

Bug Fix OP:

Compiling no longer scrolls the current script to the top

Improvement:

Added Floor Pivot Indicator.

Improvement OP:

Added menu for build settings.

Improvement OP:

Added DeleteItem, DeleteSection

^ Back to top

6/12/07 - Pre-Release 4D

The following issues have been addressed in Pre-Release 4d:

ISSUE

DESCRIPTION

Bug Fix:

Fixed issue where training NNs would produce index outside bounds of the array errors.

Bug Fix:

Fixed missing conditions in NSP-31 trade plans caused by PR4C.

Bug Fix:

Fixed Real Time issue, if the computer clock is slow, the FL is not updated correctly. OmniPilot does not receive the correct information.

Bug Fix:

Fixed slow start up of OT while compiling

Bug Fix:

Fixed Weekly charts and Gapping on holidays.

Improvement:

Added support for Turtle Trader.

^ Back to top

6/1/07 - Pre-Release 4C

The following issues have been addressed in Pre-Release 4C:

ISSUE

DESCRIPTION

Bug Fix:

Fixed issue that resulted in Custom Stops being removed from Trade Plans. (Note: You will need to reselect the checkbox for the stop on trade plans it was removed from).

^ Back to top

5/31/07 - Pre-Release 4B

The following issues have been addressed in Pre-Release 4B:

ISSUE

DESCRIPTION

Bug Fix:

Active trade plans with IB Broker were sometimes deleted after market close.

Bug Fix:

Changes to active trade plan with broker now saves correctly.

Bug Fix:

Sometimes the signal in the Focus List and the voted signal did not match.

Bug Fix:

Error 7: Exception of type System.OutOfMemoryException was thrown when training a GA.

Bug Fix:

The All Strategies option is preventing some signals from making it to the Vote Line.

Bug Fix:

Applying a trade plan with a Trailing Profit Stop to an existing position W/ Broker Stop already in place could lock chevrons in place.

Bug Fix:

Changes to Stop Levels from the IB TWS were not reflected by the trade plan.

Bug Fix:

Lab mode was recalculating results and retesting every bar.

Bug Fix:

Pending Market on open signal showed a price when clicking the advisor.

Bug Fix:

Reversing position in a trade plan showed stop chevrons backwards.

Bug Fix:

Trade Plan could be connected to wrong timeframe if charts were locked into a timeframe.

Bug Fix:

Broker Stop could be different from chevron by 1 cent.

Bug Fix:

Trade Session Boundary exit fires instantly.

Bug Fix:

Stop Market orders in strategies was not active on the first bar when using Market on Open for an entry.

Bug Fix:

Moving a broker stop could generate an object reference error.

Bug Fix:

When reconnecting to a broker sometimes the blue chevron would not show for open position without trade plans assigned to them.

Bug Fix:

ATR set to zero in Trade Plan caused errors, even when not used.

Bug Fix:

Adding data periods automatically enables the period on strategies that are set to custom.

Bug Fix:

While running analysis on the genes of an NSP31 block, clicking anywhere on the form causes the analysis to stop and OT locks up.

Bug Fix:

After entering a position in an EOD profile and confirming the notification, double clicking on the historical notification gives the message "Intraday periodicity not allowed in End-of-Day profiles".

Bug Fix:

Short signals can make it to the vote line if the strategy is set to 'Longs Only' in the Order's block and Reversing Signals Exit was enabled.

Bug Fix:

The bulb on alert lines are not always updated with the correct state.

Bug Fix:

Changing the Stop Unit to Actual Value will no longer change the Stop Level value.

Bug Fix:

Trailing chevrons such as Trailing Profit Stop will no longer move after the trade plan has finished.

Bug Fix:

Orders placed in Lab mode on a weekly chart will now fill on the next bar.

Improvement:

Improved speed of displaying the To Do List.

Improvement:

Add Market on Close (MOC) to order types for MB Trading.

Improvement:

Trade Calculator settings are now profile specific instead of global.

^ Back to top

5/24/07 - Pre-Release 4A

The following issues have been addressed in Pre-Release 4A:

ISSUE

DESCRIPTION

Bug Fix:

Fixed various "All Strategy" Voteline issues (fix originally released in R3)

Bug Fix:

Updated Broker Stop based Trade Plans to work correctly for over night orders with IB. The Current Broker Stop based Trade Plans will be over written with this update. Create a backup if you have modified the originals.

Bug Fix:

Updated DTN API.

Bug Fix:

EOD_Trader – Manual allocation fails when connected to IB.

Bug Fix:

EOD_Trader - uses Times from Interval Trading when set to Daily in UI.

^ Back to top

5/18/07 - Release 3

The following issues have been addressed in Release 3:

ISSUE

DESCRIPTION

Note:

Pre-Release 3K promoted to Release 3.

Bug Fix:

Fixed various "All Strategy" Voteline issues.

^ Back to top

5/10/07 - Pre-Release 3K

The following issues have been addressed in Pre-Release 3K:

ISSUE

DESCRIPTION

Bug Fix:

OP Fix: Fixed error when starting the WF_Trader script while currently in a RT profile.

Bug Fix:

OP Fix: Scripts allow for the use of an end date prior to that of the start date.

Bug Fix:

Fixed: Random Toolbars disappear and reappearance issue.

Bug Fix:

OP Fix: RT_Trader when set to All Strategies is not entering trades.

Bug Fix:

Fixed: ATR’s issue that resulted in Trade Plan blocks using the last 4 bars while in the

Bug Fix:

Orders block it is correctly fixed to the first ATR.

Bug Fix:

Fixed: Issue where the Weekly Confirmation strategy gives little to no signals. Lines drawn on chart disappear.

Bug Fix:

Fixed: Chart movement problems using scrollbar.

Bug Fix:

Fixed: Issue where alerts would trigger falsely.

Bug Fix:

Fixed: Issue that would cause OT to become very sluggish when using the brokerage.

Bug Fix:

Fixed: Crosshairs issue related to clicking near an object that is on the chart would sometimes cause selection issues.

Bug Fix:

Fixed: Charts rearrange themselves when restarting OT

Bug Fix:

Fixed: Issue when you remove a symbol from a 'My Symbols' list it will remove that symbol from other 'My Symbols' lists as well.

Bug Fix:

Fixed: Problem with Saving/Displaying Strategy Names if the name was too long.

Bug Fix:

Fixed: Problem where the “Copy Long Trade Plan” checkbox was not reversing Broker Stop Above/Below settings correctly.

Bug Fix:

Fixed: A display problem when reapplying a Trade Plan. The number of shares displayed in the Trade Plan Setup dialog was not correct.

Bug Fix:

Fixed: Corrected a problem with Strategies using an NN confirmation block. Advisor Scores were not being generated.

Bug Fix:

Fixed: Symbol Mapping bad for E-Mini Russell 2000, from Quote Com

Bug Fix:

Fixed: "Key in dictionary…" Error for All Strategies.

Bug Fix:

Fixed: Disconnecting from the Nirvana Broker causes OT to terminate

Bug Fix:

Fixed: Corrected problem with OmniLanguage stops: TrailingExtremeValue and RisingStop

Bug Fix:

Fixed: Corrected slow startup time for the ToDo List if many Strategies present.

Bug Fix:

Fixed: Corrected alerts not updating correctly when alert line was changed.

Bug Fix:

Fixed: Stock Spread now calculate the weight value correctly.

Improvements:

Improvement: Mouse Dragging on the price scale area causes lost track of the scale.

Improvements:

Improvement: Speed - Add the ability to turn off results storing for real time profiles.

Improvements:

Improvement: Improved error handling of missing/invalid plugins or SDK. It will now rename the strategy until the correction is made.

Improvements:

Improvement: When Order size not divisible by partial exit percent – A warning message has been added.

Improvements:

Improvement: Fired alerts on a New Signal are now identified and are sort order is editable under the Alerts manager.

Improvements:

Improvement: In Realtime the Latency issues have been improved.

Improvements:

Improvement: Order (Priority) of Processing in Real Time.

Improvements:

Improvement: Added the ability to only run analysis on specific symbols.

Improvements:

Improvement OP: Add back the "Exit Signal forces Positions To Close" option.

Improvements:

Improvement: Trade Plan Editor parameter naming “Above Close” changed to "Above Last" (and “Below Last”)

Improvements:

Improvement: Added tick size for securities to the vendor database and provided a User Interface for user to edit it.

Improvements:

Improvement: Additional logging added to Brokerage.txt for debugging trading issues.

Improvements:

Improvement: Improved speed when using Chart Patterns.

Improvements:

Improvement: Improved Virtual Stops by rounding them to the price the security actually trades. Note: this is currently only a change made to the active trading levels. Trade Plans used in Strategy backtests, Walk Forward tests, etc. do not yet use rounded prices. This will be a future change. Plotted stop levels for Strategies in the chart may differ slightly from the currently active chevron stop level for this reason.

Improvements:

Improvement: Add an additional parameter for TradePlans/Order. Adjust stop based on Entry, in addition to High/Low and Close. This change is primarily to handle cases in actual trading where a pending order will be filled at the beginning of a bar or session – typical for EOD trading. When the open price gaps down, a Stop based on the previous bar’s data (High/Low and Close) might be higher than the open price.

Improvements:

Updated OmniPilot script logging to show which messages are logged by the script versus the main program

Improvements:

Added the optional functionality to Trade Plans to use the last price level for the current (forming) bar to update broker stops based on virtual levels. This change is to help EOD users updating their broker positions after the trading session when the current bar is considered not complete by OT, because no data has been received for the next bar. Added the checkbox to the Trade Plan Editor “Update level based on after-session trading” This option is only active when the Stop Unit is set to Virtual Level. This setting will affect Stop Market, Limit and Stop Limit orders. This functionality is intended for EOD profiles.

Improvements:

Two new methods have been added to the Portfolio Simulator for ARM users, NN Trades and NN%

^ Back to top

4/23/07 - Pre-Release 3I

The following issues have been addressed in Pre-Release 3I:

ISSUE

DESCRIPTION

Bug Fix:

Fixed 'Error 5: Item has already been added.' that was encountered when running the portfolio simulator with 'All Strategies' as the strategy source.

^ Back to top

4/20/07 - Pre-Release 3H

The following issues have been addressed in Pre-Release 3F:

ISSUE

DESCRIPTION

Bug Fix:

Portfolio Simulation: When specifying the minimum number of shares to trade, it would only trade more shares. i.e. if you would set it to 100, and use fixed allocation of 100 shares it would not take any trades.

Bug Fix:

Portfolio Simulation: Setting a minimum amount to trade (or minimum percent), would sometimes still allow trades to go through with an amount (percentage) less than the specified amount.

Bug Fix:

Portfolio Simulation: Trade in increments of 1 shares, should not affect the equity curve. In the previous versions it could be slightly different.

Bug Fix:

Portfolio Simulation: Validation of trading parameters to make sure min is smaller than max value, did not check whether it was enabled. So if one of them is disabled it should not perform the validation.

Bug Fix:

When pyramiding in the Portfolio Simulator the statistics would be wrong.

Bug Fix:

VBA Stops not plotting correctly in PR3c to PR 3e

Bug Fix:

OmniLanguage: Strings which contain special characters are causing run time errors.

Bug Fix:

With multiple monitors, toolbars sometime disappear and reappear at random

Bug Fix:

The stop list in the orders block did not resize correctly with the form.

Bug Fix:

Trade plan markers for Strategies color was being ignored in the chart template

Bug Fix:

Realtime charts would lose their position in the chart window or chartbook when multiple charts using different timeframes were loaded.

Improvement

Extensive Trade plan editor User Interface changes (See updated Documentation-Help»Trade Plans)

Improvement

Changed the behavior to right click position chevron to edit trade plan instead of double click as well as other right click options.

Improvement

The color of the vertical Trade Plan Markers, drawn in the chart for each Trade Plan step change, can now be controlled by chart options (View->Chart Options…Colors Tab). This also allows you to hide this line by changing the color to the background color.

Improvement

A customizable blank area between the right vertical axis and the most recent bar can now be configured under Chart options: custom margin (View->Chart Options…Charts Tab)

Improvement

The font for the price levels can be changed under Chart Options.

Improvement

Changed the behavior of the Trailing Profit stop chevron so it does not move and is at the level of the stop

Improvement

Changed the behavior of the Trailing Profit stop chevron so it does not become inactive when manually adjusted from the chart

Improvement

Provided a Check that you have bought enough to execute partial exit

Improvement

In RT the order of alerts displayed in the grid, now does not change

Improvement

Added Alerts triggered on "Any New Signal" under the alerts icon (!). The lower section shows the triggered Alerts.

Improvement

The NN Score block can now be used as the last block in a strategy, in which case it should filter out the entire order (not just its signal) based on the signal’s score

Improvement

Added New Functionality to Speed Up OmniTrader by allowing OT users to turn off the storing of data for reports and Analyze Forming Bars. This setting is under the Test Settings tab in the To Do List. The option to store data for reports should be toggled on before running the analysis to be used in Reports and Portfolio.

Improvement

Added BrokerRoute and TickSize fields to the Symbols32 database, available for Commodities (Edit/Add new commodities)

^ Back to top

3/23/07 - Pre-Release 3F

The following issues have been addressed in Pre-Release 3F:

ISSUE

DESCRIPTION

Bug Fix:

Error 380: Invalid property value.

^ Back to top

3/14/07 - Pre-Release 3E

The following issues have been addressed in Pre-Release 3E:

ISSUE

DESCRIPTION

Bug Fix:

Fixed a runtime error when using a strategy that contains ARM2R3, ARM3R2 or ARM3R3 block.

^ Back to top

3/13/07 - Pre-Release 3D

The following issues have been addressed in Pre-Release 3D:

ISSUE

DESCRIPTION

Bug Fix:

Applying a trade plan to a manually opened or abandoned position would close the position.

Bug Fix:

Pos column in Focus List would sometimes display in-short instead of the correct in-long signal.

Bug Fix:

Crosshairs on real-time charts would disappear when you stopped moving the mouse.

Bug Fix:

Resolved an issue that would cause duplicated indicators to plot in the incorrect pane.

Bug Fix:

When right clicking on a chart and choosing 'Add Color Chart' would cause exceptions.

Bug Fix:

Under certain circumstances deleting a trend line annotation would delete more than intended.

Bug Fix:

If exits became active and one fired on the most current bar of data, the exit level was not displayed on the advisor window.

Bug Fix:

When trying to save a Chart Template from the Right click menu it would result in an exception.

Bug Fix:

Under rare conditions when using the paper broker fixed loss/profit stops would change as market price changed.

Bug Fix:

Trying to update COT data from the To Do List would result in an error 429.

Bug Fix:

Trade plans were not correctly validating trade plans that reversed directions while editing.

Bug Fix:

Higher minute RT timeframes such as a 240 minute chart would not update in the focus list.

Bug Fix:

Previously you could only resize indicators in the very top or bottom pane. Now all panes are resizable.

Bug Fix:

Auto Margin now works as intended.

Bug Fix:

Charts in real time would reposition themselves when restoring OT from a minimized state.

Bug Fix:

Plotting certain systems created in OmniLanguage would cause exceptions.

Bug Fix:

The 'New signal' alert only fired after the market closes in RT.

Bug Fix:

The 'New Signal' alert would not fire for strategies that used Market on Open orders.

Bug Fix:

In certain cases a trade plan that uses a Market order would use the next bars open price instead of the correct market price.

Bug Fix:

Vegas systems from the Woodies CCI plug-in would cause errors while running analysis.

Bug Fix:

When printing the focus list report a couple symbols were truncated per page.

Bug Fix:

Voted Signal indicator no longer disappears when changing charts.

Bug Fix:

The Chart Period scroll bar in Portfolio Simulation mode would not scale correctly.

Bug Fix:

Several portfolio fixes for pyramiding, reversing positions, and multiple positions.

Bug Fix:

Closing OT while a RT profile was refreshing would result in run time errors.

Bug Fix:

Reloading data from a charts right click menu works correctly again.

Bug Fix:

Trying to edit Metastock data would result in an error.

Improvement:

The chart crosshairs are available in the CPRM Pattern Examples window as they were in prior versions.

^ Back to top

2/13/07 - Pre-Release 3C

The following issues have been addressed in Pre-Release 3C:

ISSUE

DESCRIPTION

Bug Fix:

Exits now show the correct delay on the vote line for Market on Open and Market on Close exits.

Bug Fix:

The activation of VBA exits are no longer delayed by one bar.

Bug Fix:

Fixed FL signal display issue if an exit fired on the same bar as the signal.

Bug Fix:

When changing the account in the Portfolio Simulation it would not re-run the simulation, instead it would use the cached data.

Bug Fix:

In the Portfolio Simulation when using multiple minimum or maximum restrictions at the same time only one was being used.

Bug Fix:

Fixed an issue that could cause the NSP strategy building block not to show when editing/creating strategies.

Bug Fix:

The correlation column from the Group Trader window will no longer override your focus list sort order.

Bug Fix:

Moving chart annotations with the data values window open will no longer cause the data values window to disappear.

Bug Fix:

Indicators and systems that should plot on the price chart will now plot in the correct location and will no longer create their own panes.

Bug Fix:

Resolved run time errors when using certain fundamentals in OmniScan.

Bug Fix:

The trade calculator will now properly save the values you set as default.

Bug Fix:

Resolved several issues with the displayed positioning of stop chevrons.

Improvement:

Added Average Percent Invested to Portfolio Simulation stats.

Improvement:

Trade plans now have separate plan templates for long and short positions.

^ Back to top

1/19/07 - Pre-Release 3B

The following issues have been addressed in Pre-Release 3B:

ISSUE

DESCRIPTION

Bug Fix:

Fixed "Error 3065" when running To-do list and update “All OmniScan lists” is selected.

Bug Fix:

Fixed error related to VBA stops that use "ExitLevel = (SomeValue)"

^ Back to top

1/18/06 - Pre-Release 3A

The following issues have been addressed in Pre-Release 3A:

ISSUE

DESCRIPTION

Bug Fix:

Fixed various color chart issues.

Bug Fix:

Fixed pattern initialization on first time startup after installing CPRM.

Bug Fix:

Fixed issue with pattern example window.

Bug Fix:

Fixed error when adding and/or removing various timeframes in RealTime without closing the form.

Bug Fix:

Fixed performance issue when using Lab Mode with fixed test period.

Bug Fix:

Fixed error when plotting custom indicators in RealTime.

Improvement:

Stops now are active on the entry bar rather than being delayed by one bar.

Improvement:

Validation added for fixed test period date range in To-Do-List.

Improvement:

Logging added for VBA files that have been manually created with invalid .NET names.

Note:

Nirvana Club members please read the following information found here before running the update.

^ Back to top

12/21/06 - Release 2

The following issues have been addressed in Release 2:

ISSUE

DESCRIPTION

Note:

Pre-Release 2C promoted to Release 2.

^ Back to top

12/18/06 - Pre-Release 2C

The following issues have been addressed in Pre-Release 2C:

ISSUE

DESCRIPTION

Bug Fix:

Printing reports using Metastock no longer errors.

Bug Fix:

Fixed various color chart issues.

Bug Fix:

Fixed error when creating a new 'My Symbols' list, then adding symbols to it.

Bug Fix:

Buying Power not showing in the Portfolio.

Bug Fix:

Trade Calculator gets "Error 5: Cannot find column [NaN]" in Forex profiles after you get your Portfolio Simulation analysis.

Bug Fix:

Fixed error when printing the focus list in a RT profile.

Bug Fix:

If you click 'All Off' right after duplicating an indicator it will not remove the check from the duplicated indicator.

Bug Fix:

Charts in portfolio simulation are not showing matching data range.

Bug Fix:

Error 9: when clicking on the Chart area of a symbol that does not have data.

Bug Fix:

Error 6: Arithmetic operation resulted in an overflow when trying to access the Trade Calculator. Running Forex in RT.

Bug Fix:

Error 3190" caused when using to many data periods.

Improvement:

Added ability to right-click symbols & set the user data path via the Focus List.

^ Back to top

12/1/06 - Pre-Release 2B

The following issues have been addressed in Pre-Release 2B:

ISSUE

DESCRIPTION

Bug Fix:

Fixed issue on startup and when switching profiles when having multiple 'My Symbols' lists enabled.

Bug Fix:

Portfolio simulation was not being ran again when using the 'Advisor Cutoff' setting.

Bug Fix:

Fixed 'Syntax error in query expression' error when using Trade Calculator on an international version of Windows.

Bug Fix:

Fixed calculation error in 'Drawdown %' statistic in the Portfolio Simulation.

^ Back to top

11/22/06 - Pre-Release 2A

The following issues have been addressed in Pre-Release 2A:

ISSUE

DESCRIPTION

Bug Fix:

Fixed issues when running portfolio simulation on FOREX symbols.

Improvement:

Improved speed of portfolio simulation.

Improvement:

Improved the behavior of crosshairs in the chart. Clicking to de-select no longer displays the crosshairs.

^ Back to top

11/17/06 - Release 1

The following issues have been addressed in Release 1:

ISSUE

DESCRIPTION

Official Release:

Release 1 released.

^ Back to top

 

 

 

Main Menu

Section Menu

All contents © 1999-2008 Nirvana Systems, Inc. unless otherwise noted. | Disclaimer | Privacy Policy